Page 1 of 1
V4 Single Extruder Fan Shroud
Posted: Sun Mar 29, 2015 1:47 pm
by sthone
- V4Shroud003.jpg (78.17 KiB) Viewed 7214 times
I came up with a simple fan shroud for the Single V4 extruder if anyone is interested.
http://www.thingiverse.com/thing:746282
-Steve
Re: V4 Single Extruder Fan Shroud
Posted: Thu Apr 02, 2015 1:45 am
by Farr0wn3d
I wanted to mention for anyone that is considering this for an M2 equipped with the v3b, it will not fit, it hits the bed before the nozzle. Just a heads up.
Jeremy.
Re: V4 Single Extruder Fan Shroud
Posted: Thu Apr 02, 2015 3:01 pm
by sthone
Yeah the 3VB is a total different setup, I might be able to modify the design to fit the V3B if you haven't all ready found another one somewhere.
-Steve
Re: V4 Single Extruder Fan Shroud
Posted: Sun Apr 12, 2015 10:48 pm
by Farr0wn3d
Steve, I'll likely be upgrading my hot end soon here, so there's little point in making additions to the v3b setup at the moment, however thanks for the offer.
Jeremy.