V4 Single Extruder Fan Shroud

The place to discuss your hardware and software/firmware modifications...
Post Reply
User avatar
sthone
Posts: 894
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut
Contact:

V4 Single Extruder Fan Shroud

Post by sthone » Sun Mar 29, 2015 1:47 pm

V4Shroud003.jpg
V4Shroud003.jpg (78.17 KiB) Viewed 4070 times
I came up with a simple fan shroud for the Single V4 extruder if anyone is interested.

http://www.thingiverse.com/thing:746282

-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com

User avatar
Farr0wn3d
Posts: 298
Joined: Tue Mar 31, 2015 4:16 am
Location: Calgary, Alberta, Canada

Re: V4 Single Extruder Fan Shroud

Post by Farr0wn3d » Thu Apr 02, 2015 1:45 am

I wanted to mention for anyone that is considering this for an M2 equipped with the v3b, it will not fit, it hits the bed before the nozzle. Just a heads up.

Jeremy.

User avatar
sthone
Posts: 894
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut
Contact:

Re: V4 Single Extruder Fan Shroud

Post by sthone » Thu Apr 02, 2015 3:01 pm

Yeah the 3VB is a total different setup, I might be able to modify the design to fit the V3B if you haven't all ready found another one somewhere.

-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com

User avatar
Farr0wn3d
Posts: 298
Joined: Tue Mar 31, 2015 4:16 am
Location: Calgary, Alberta, Canada

Re: V4 Single Extruder Fan Shroud

Post by Farr0wn3d » Sun Apr 12, 2015 10:48 pm

Steve, I'll likely be upgrading my hot end soon here, so there's little point in making additions to the v3b setup at the moment, however thanks for the offer.

Jeremy.

Post Reply