helifrek wrote:Let me know if they work, if you ordered a ten pack and don't need all ten let me know! Those little converters look like they would be pretty handy. Do the fans need anything special since they use 3 wires? I see some extra cables, is there an adapter included?
Can't wait to hear about your results!
You don't use the yellow cable, I just roll it back into the shrink tubing. (Its for sending RPM signal to CPU when used on a computer motherboard).
The plug is different than what comes with the M2 so I cut the fan plug off and soldered the fan cables to M2 connector and used shrink tubing to neaten it up.
Actually that was the first time I did this. Last week I replaced all the M2 connectors with a larger Molex type. So now I only have two connectors on the harness. A six pin connector for everything and a two pin that is for the bed fan. I'm keeping several nozzles assembled with fans and drives, so it lets me do a quick change with these connectors.