I am in need of a new nozzle fairly soon. I looked on the website and only found the V3b nozzles. I have one at home and compared it to the V4 and the V3b is definitely a little larger (top to bottom). I emailed support, but haven't heard back (I imagine they are super busy assembling and designing their machines.) Can anyone on here point me to a link to where I can pick up a new nozzle and a few spares for the V4?
Thanks!!
Where to purchase V4 nozzles
- willnewton
- Posts: 479
- Joined: Wed Apr 09, 2014 8:32 pm
Re: Where to purchase V4 nozzles
http://www.makergear.com/products/m2-upgrades
Just an FYI, these are not interchangeable with the v3b, as they require different mounting systems. The v4 is a good system for sure though and you won't miss the v3b.
-update, just reread your post and realize you may already have a v4 and therefore know how good it is.
Just an FYI, these are not interchangeable with the v3b, as they require different mounting systems. The v4 is a good system for sure though and you won't miss the v3b.
-update, just reread your post and realize you may already have a v4 and therefore know how good it is.
I'm finally back to where I started two days ago!
A thread with some stuff in it I update every once in a while. viewtopic.php?f=8&t=9
See some of my stuff http://www.thingiverse.com/willnewton/favorites
A thread with some stuff in it I update every once in a while. viewtopic.php?f=8&t=9
See some of my stuff http://www.thingiverse.com/willnewton/favorites
Re: Where to purchase V4 nozzles
Unless you want a complete spare V4 hot end, which is on this page:
http://www.makergear.com/products/m-series-3d-printers
http://www.makergear.com/products/m-series-3d-printers
Re: Where to purchase V4 nozzles
Thanks!! Got them ordered. Sometimes I can be horrible at navigating websites. I am much better with technology that manufactures things!
Thanks again.
Thanks again.