Page 2 of 8
Re: Quieter Fans
Posted: Wed Dec 09, 2015 4:10 am
by kartcrg
Re: Quieter Fans
Posted: Wed Dec 09, 2015 4:36 am
by Pekish79
Re: Quieter Fans
Posted: Wed Dec 09, 2015 4:41 am
by Pekish79
Mach wrote:I recently changed out the extruder and electronics fan for the 40mm Noctua. I bought the Noctua 60 as well but thought cracking the internal case on the power supply more than I wanted to tear into.
I did replace the the 50mm bed fan with a 15x50 24V blower instead of the 50mm fan. So far I'm happy with the noise level and performance. I did so based on this Reddit thread
https://www.reddit.com/r/3Dprinting/com ... ud_fan_vs/. I'm still testing and need to make a duct for it but so far so good.
the blower i see there in that thread is 12V make sure urs is 24V
the other one they link is
http://www.amazon.com/gp/product/B00MJU ... ge_o02_s00
as well 12V
Re: Quieter Fans
Posted: Wed Dec 09, 2015 4:48 am
by Mach
Re: Quieter Fans
Posted: Wed Dec 09, 2015 4:57 am
by Pekish79
^_^ that is perfect
Re: Quieter Fans
Posted: Wed Dec 09, 2015 5:23 am
by kartcrg
Thanks dude. Sucks they're ugly and not black haha.
Re: Quieter Fans
Posted: Wed Dec 09, 2015 8:57 am
by jsc
In a previous fan thread, someone pointed out to me that blower fans actually throw out air centrifugally, in the same plane as the rotation of the blades. So you will need to work out some mount for it, it is not a simple replacement part. They are also best for high static pressure/low CFM, so would work better with some sort of fan duct.
Re: Quieter Fans
Posted: Fri Feb 05, 2016 11:05 am
by helifrek
Re: Quieter Fans
Posted: Sat Feb 06, 2016 4:38 am
by willnewton
For all the trouble finding the the correct voltage quiet bed fan, couldn't a voltage divider be used? I just wired one for my leveling probe and it works fine for dropping 12v to 5v.
If you start with a 24v input and add two 10k resistors and you halve the output to 12v.
https://en.m.wikipedia.org/wiki/Voltage_divider
I am not an electro-guru so may be missing something in this simple solution.
Re: Quieter Fans
Posted: Sat Feb 06, 2016 5:41 am
by jsc
That only works if there is no other load in the circuit, like a fan.