How You Too Can Achieve Printing Nirvana
How You Too Can Achieve Printing Nirvana
Oh my dear heavens - i have achieved printing nirvana!
The components:
The MIC6 tooling plate:
It's flat. It's really, really, really flat. I can actually touch the nozzle to the bed, move it to every single point on the plate, and the nozzle does not shift by one one-thousandth of a millimeter.
And the heat goes aaaaall the way out to the edges of the plate. No more prints popping off in the chilly outer corners.
PEI surface:
FTW! Attached with the 3M full sheet tape to the non-beaded side of the MIC6 so that no adhesive is needed. Picture of the ugly result below, but man-oh-man, does it ever deliver!
Those of you with the plates, give the 0.03" PEI a try on it!
The components:
The MIC6 tooling plate:
It's flat. It's really, really, really flat. I can actually touch the nozzle to the bed, move it to every single point on the plate, and the nozzle does not shift by one one-thousandth of a millimeter.
And the heat goes aaaaall the way out to the edges of the plate. No more prints popping off in the chilly outer corners.
PEI surface:
FTW! Attached with the 3M full sheet tape to the non-beaded side of the MIC6 so that no adhesive is needed. Picture of the ugly result below, but man-oh-man, does it ever deliver!
Those of you with the plates, give the 0.03" PEI a try on it!
Last edited by Jules on Tue Mar 08, 2016 5:49 pm, edited 1 time in total.
Re: How You Too Can Achieve Printing Nirvana
Jules, have you tried with PC-Plus?
Re: How You Too Can Achieve Printing Nirvana
No, I don't have any yet. (Gonna order some after tax time.)
Re: How You Too Can Achieve Printing Nirvana
thats great, glad you like the plate and its working for you.
Re: How You Too Can Achieve Printing Nirvana
Yeah, you did a great job on it Jim - I almost hate to talk it up 'cause you won't have time to do anything else if word gets out.jimc wrote:thats great, glad you like the plate and its working for you.
Re: How You Too Can Achieve Printing Nirvana
i think almost everyone on the forum has one already. in the past year i have made more of those than i can remember.
Re: How You Too Can Achieve Printing Nirvana
Well, I wish I'd tried it sooner. (And I thought I had a pretty level glass, all things considered. ) But what a difference. It's night and day.
Re: How You Too Can Achieve Printing Nirvana
Also those corner clamps rock, Jim.
Re: How You Too Can Achieve Printing Nirvana
thanks everyone.
Re: How You Too Can Achieve Printing Nirvana
Hey Jules, I see .003" PEI on McMaster but not .03". Did you use .003"?