Bed Stop for M2

The place to discuss your hardware and software/firmware modifications...
Post Reply
User avatar
quaver
Posts: 51
Joined: Fri Feb 27, 2015 4:32 am

Bed Stop for M2

Post by quaver » Tue Sep 06, 2016 3:45 am

Finally, after three years, I got around to designing/printing a bed stop for parking the Z-axis. Snaps into place, no fasteners required. The hoop section functions as a spring and support. Can work successfully with PETG or Taulman 910. Photo and STL attached.
Attachments
bed_stop_MGM2_v13.stl
Bed Stop, M2
(87.39 KiB) Downloaded 411 times
IMG_2092.JPG
Bed Stop, Taulman 910

User avatar
insta
Posts: 2007
Joined: Tue Sep 16, 2014 3:59 am

Re: Bed Stop for M2

Post by insta » Thu Sep 08, 2016 3:32 pm

Picture of it installed?
Custom 3D printing for you or your business -- quote [at] pingring.org

User avatar
quaver
Posts: 51
Joined: Fri Feb 27, 2015 4:32 am

Re: Bed Stop for M2

Post by quaver » Thu Sep 08, 2016 11:32 pm

Installed...
Attachments
IMG_2098 (1).JPG
Bed stop installed, rest
IMG_2097 (1).JPG
Bed stop installed

User avatar
Jules
Posts: 3144
Joined: Wed Jan 21, 2015 1:36 am

Re: Bed Stop for M2

Post by Jules » Thu Sep 08, 2016 11:37 pm

Looks nice! :D

spmahoney78
Posts: 28
Joined: Thu Mar 24, 2016 1:01 am

Re: Bed Stop for M2

Post by spmahoney78 » Sun Sep 18, 2016 4:22 am

That's a great design. thank you!

User avatar
quaver
Posts: 51
Joined: Fri Feb 27, 2015 4:32 am

Re: Bed Stop for M2

Post by quaver » Sun Sep 18, 2016 10:28 pm

spmahoney78 wrote:That's a great design. thank you!
Thanks, and you are welcome.

Post Reply