Is there a model available of the extruder?

The place to discuss your hardware and software/firmware modifications...
Post Reply
SLCJedi
Posts: 7
Joined: Wed Jul 15, 2015 4:44 pm

Is there a model available of the extruder?

Post by SLCJedi » Sat Nov 26, 2016 1:11 am

Hey all, I did some searches, but maybe I don't have the right terms. Does anyone have a model of the entire machine or at least the extruder? I'm trying to design a print fan using a 50mm blower that blows at 270-360 degrees around the nozzle.

Thanks in advance.

Hugs
Posts: 90
Joined: Tue Mar 08, 2016 11:16 pm
Location: Pennsylvania

Re: Is there a model available of the extruder?

Post by Hugs » Sun Nov 27, 2016 12:11 am

The first place I'd check would be the Github repo: https://github.com/MakerGear/M2

SLCJedi
Posts: 7
Joined: Wed Jul 15, 2015 4:44 pm

Re: Is there a model available of the extruder?

Post by SLCJedi » Sun Nov 27, 2016 2:41 am

I have only found the 3D printed pieces, not the whole extruder assembly on Github. :)

Slipshine
Posts: 182
Joined: Sun Apr 13, 2014 3:02 am

Re: Is there a model available of the extruder?

Post by Slipshine » Sun Nov 27, 2016 10:34 pm

It could just be me but if your new to the north there are better ways to warm your room in the winter. ;)

Hugs
Posts: 90
Joined: Tue Mar 08, 2016 11:16 pm
Location: Pennsylvania

Re: Is there a model available of the extruder?

Post by Hugs » Sun Nov 27, 2016 10:48 pm

SLCJedi wrote:I have only found the 3D printed pieces, not the whole extruder assembly on Github. :)

Ah...I see. So you want a full 3d model of this entire assembly?

SLCJedi
Posts: 7
Joined: Wed Jul 15, 2015 4:44 pm

Re: Is there a model available of the extruder?

Post by SLCJedi » Mon Nov 28, 2016 1:02 am

That's it. I have now modeled most of the important bits. So kind of a moot point. :)

SIERRA086
Posts: 29
Joined: Mon Oct 03, 2016 1:36 pm

Re: Is there a model available of the extruder?

Post by SIERRA086 » Wed Nov 30, 2016 6:00 pm

SLCJedi wrote:That's it. I have now modeled most of the important bits. So kind of a moot point. :)
Would you mind sharing? It would be great to have for a modding reference point.

SLCJedi
Posts: 7
Joined: Wed Jul 15, 2015 4:44 pm

Re: Is there a model available of the extruder?

Post by SLCJedi » Fri Dec 02, 2016 1:46 am

Sure. I will upload to thingiverse as an STL. I'm using 123D Design, so not many options for files unless you use 123D as well.

Here is what I have as a crazy dual 50mm blower option. Still have to work out the bracketry. I will also make a single 50mm blower version as the dual may be a lot of weight.
Attachments
15250768_1160326897386351_239280594431365733_o.png
15272052_1160323540720020_3871682280675504465_o.png
15272292_1160323340720040_3995544724970212012_o.png
15235591_1160321137386927_5771404879451875772_o.png

SLCJedi
Posts: 7
Joined: Wed Jul 15, 2015 4:44 pm

Re: Is there a model available of the extruder?

Post by SLCJedi » Fri Dec 02, 2016 2:02 am

Basic model for orientation in SLT and 123dx here:

http://www.thingiverse.com/thing:1932742

SIERRA086
Posts: 29
Joined: Mon Oct 03, 2016 1:36 pm

Re: Is there a model available of the extruder?

Post by SIERRA086 » Sat Dec 03, 2016 12:23 am

thank you very much for sharing this, should make my future modifications much easier to implement!

Post Reply