Is there a model available of the extruder?
Is there a model available of the extruder?
Hey all, I did some searches, but maybe I don't have the right terms. Does anyone have a model of the entire machine or at least the extruder? I'm trying to design a print fan using a 50mm blower that blows at 270-360 degrees around the nozzle.
Thanks in advance.
Thanks in advance.
Re: Is there a model available of the extruder?
The first place I'd check would be the Github repo: https://github.com/MakerGear/M2
Re: Is there a model available of the extruder?
I have only found the 3D printed pieces, not the whole extruder assembly on Github.
Re: Is there a model available of the extruder?
It could just be me but if your new to the north there are better ways to warm your room in the winter.
Re: Is there a model available of the extruder?
SLCJedi wrote:I have only found the 3D printed pieces, not the whole extruder assembly on Github.
Ah...I see. So you want a full 3d model of this entire assembly?
Re: Is there a model available of the extruder?
That's it. I have now modeled most of the important bits. So kind of a moot point.
Re: Is there a model available of the extruder?
Would you mind sharing? It would be great to have for a modding reference point.SLCJedi wrote:That's it. I have now modeled most of the important bits. So kind of a moot point.
Re: Is there a model available of the extruder?
Sure. I will upload to thingiverse as an STL. I'm using 123D Design, so not many options for files unless you use 123D as well.
Here is what I have as a crazy dual 50mm blower option. Still have to work out the bracketry. I will also make a single 50mm blower version as the dual may be a lot of weight.
Here is what I have as a crazy dual 50mm blower option. Still have to work out the bracketry. I will also make a single 50mm blower version as the dual may be a lot of weight.
Re: Is there a model available of the extruder?
thank you very much for sharing this, should make my future modifications much easier to implement!