mic 6 plate

The place to discuss your hardware and software/firmware modifications...
Post Reply
sonra
Posts: 116
Joined: Sat Aug 22, 2015 3:44 pm
Location: Israel

mic 6 plate

Post by sonra » Sun Sep 03, 2017 2:04 pm

hi guys
I read about the option to replace the glass glass with aluminum . is the aluminum should be from any type of material ? ( as i know there are many kind of aluminum type )
i also that Insta is selling plates that is coated with PEI . Is it better and does the coat has to be renew after prints ?
Regards Doron

User avatar
Jules
Posts: 3144
Joined: Wed Jan 21, 2015 1:36 am

Re: mic 6 plate

Post by Jules » Sun Sep 03, 2017 5:19 pm

It's much better in my opinion, and you just apply the PEI sheet one time. It's thick and doesn't wear out. :)
(You also don't need to use adhesives if you have it on the Mic6 plate.)

Post Reply