Page 1 of 1

mic 6 plate

Posted: Sun Sep 03, 2017 2:04 pm
by sonra
hi guys
I read about the option to replace the glass glass with aluminum . is the aluminum should be from any type of material ? ( as i know there are many kind of aluminum type )
i also that Insta is selling plates that is coated with PEI . Is it better and does the coat has to be renew after prints ?
Regards Doron

Re: mic 6 plate

Posted: Sun Sep 03, 2017 5:19 pm
by Jules
It's much better in my opinion, and you just apply the PEI sheet one time. It's thick and doesn't wear out. :)
(You also don't need to use adhesives if you have it on the Mic6 plate.)