Thumb screw for M2 Bed Leveling

The place to discuss your hardware and software/firmware modifications...
Post Reply
psd
Posts: 182
Joined: Tue Mar 08, 2016 9:09 pm

Thumb screw for M2 Bed Leveling

Post by psd » Wed Oct 18, 2017 3:17 pm

I made a hand knob for the Makergear M2 for bed leveling,
this makes the leveling process so much easier than using the allen key and reaching under to find the set screw.
It also allows fine tuning on the fly.

https://www.thingiverse.com/thing:2592460
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com

psd
Posts: 182
Joined: Tue Mar 08, 2016 9:09 pm

Re: Thumb screw for M2 Bed Leveling

Post by psd » Sat Oct 28, 2017 6:04 pm

what a difference on the fly bed leveling makes!

with these thumb screws you can make slight adjustments to any corner as its printing, really good for fine tuning during skirt print!
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com

iteration1
Posts: 3
Joined: Thu Jul 13, 2017 2:59 pm
Location: East Coast, USA

Re: Thumb screw for M2 Bed Leveling

Post by iteration1 » Wed Dec 06, 2017 5:03 am

Thank You PSD...saves me from coming up w/ my own version. I'll probably use these for our unit at work. Ability to tweak bed on the fly has been high om ,y list/

airscapes
Posts: 95
Joined: Wed Jan 31, 2018 11:36 pm

Re: Thumb screw for M2 Bed Leveling

Post by airscapes » Sat Mar 24, 2018 2:34 pm

what did you print this with, PLA or something else?

psd
Posts: 182
Joined: Tue Mar 08, 2016 9:09 pm

Re: Thumb screw for M2 Bed Leveling

Post by psd » Sat Mar 24, 2018 3:46 pm

You can use any filament it doesn’t take much stress
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com

Post Reply