Will m3 part designs be put on github like the m2 was?
Will m3 part designs be put on github like the m2 was?
I don't see the m3 models for the 3D printed and laser cut parts on github like the m2 parts are - will they be put up eventually? As a m2 owner I really appreciated MakerGear's open design and ability to hack things, I'm running with a couple of modified parts.
Re: Will m3 part designs be put on github like the m2 was?
Necroposting here, but there doesn't seem to be an answer. I'd like to print some parts with fan modifications for our application - is there a repository for M3(SE/ID) systems out there? Thanks in advance, AD
Re: Will m3 part designs be put on github like the m2 was?
There isn't one for the M3 stuff on github and every time this has come up lately no one from Makergear has chimed in (which is weird because they are usually pretty open with everything else they have done)... so who knows.
You might want to try emailing them direct and see if you can get a reply that way.
You might want to try emailing them direct and see if you can get a reply that way.
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
See my projects at https://www.theneverendingprojectslist.com
Re: Will m3 part designs be put on github like the m2 was?
As an update, the folks at Makergear support were willing to supply an STL for the part needed. So for the moment calling them will likely yield what you need. There aren’t a ton of 3D printed parts in the M3 (which is another reason I love mine.) All I want now is a bigger one!