Need some advice on a suction device

The place to discuss your hardware and software/firmware modifications...
Post Reply
quentinthornton
Posts: 10
Joined: Fri Jul 10, 2015 6:41 am

Need some advice on a suction device

Post by quentinthornton » Tue Jun 05, 2018 8:39 pm

Hey guys, I'm setting up a ventilation system using this pool hose. What would you guys suggest I use as the suction device? I was thinking of lining up a couple computer fans, or using a hairdryer without the heat coils :D, but I was just wondering if there were other options that you guys think would be better. Any input is appreciated. Thanks.

User avatar
zemlin
Posts: 444
Joined: Thu Feb 04, 2016 9:32 pm
Location: Indianapolis, Indiana

Re: Need some advice on a suction device

Post by zemlin » Fri Jun 22, 2018 5:42 pm

That link doesn't work. What diameter is the hose?

Phil
Posts: 173
Joined: Mon Sep 19, 2016 7:49 pm

Re: Need some advice on a suction device

Post by Phil » Fri Jun 22, 2018 5:51 pm

I would suggest visiting Home Depot, Lowes, etc. and looking in their HVAC departments. I did that the other night to solve a similar problem. It is amazing the variety of stuff they have on-hand.
I used an inline fan and flexible dryer vent tubing. It may be too large for what you have in mind, but looking at their stock might give you some good ideas.

Post Reply