laywood - d3

The place to discuss filament...
Post Reply
abovetheline
Posts: 2
Joined: Sat Aug 16, 2014 2:07 am

laywood - d3

Post by abovetheline » Tue Aug 19, 2014 4:08 am

Can the M2 print the laywood-D3 filament?

dryeti
Posts: 23
Joined: Wed Apr 16, 2014 10:22 am

Re: laywood - d3

Post by dryeti » Tue Sep 02, 2014 1:59 pm

In general yes. For the material, it would be good to use a wider nozzle than the standard 0.35mm, so >=0.50mm.
Moreover, laywood is very brittle - so I had problems feeding it via the standard ptfe tube. It sometimes just broke. So I positioned the spool above the printer and fed the filament directly to the print head which worked fine.

Post Reply