esun petg

MG_MLS · Post by **MG_MLS** » Mon Nov 03, 2014 3:52 am

This sounds like a good reason for a first post, I'll take two kg.

Have learned a lot here over the last 3 or 4 months!

jimc · Post by **jimc** » Mon Nov 03, 2014 3:56 am

welcome!

ErikAkia · Post by **ErikAkia** » Mon Nov 03, 2014 8:32 am

Hi Jim,
I would like a roll of each color (4 right?). Am I understanding correctly that they will be drop shipping it direct?

Thanks
Erik

jimc · Post by **jimc** » Mon Nov 03, 2014 1:16 pm

Erik, im not too sure about the shipping yet and how much that will add to the cost. William is going to figure all that out and let us know. I dont think they are drop shipping though. The point of getting this group together was to keep the shipping down so the more people we have the less the shipping will probably be. I would imagine it will goto wills shop then he will send everyones order to them.

insta · Post by **insta** » Mon Nov 03, 2014 3:24 pm

I'm in for 2kg of natural, and a spool of their "cleaner filament" if they can stuff that into the box

jimc · Post by **jimc** » Mon Nov 03, 2014 3:29 pm

Yeah will stocks the cleaner filament i believe. He was giving samples a while back

Capt. John · Post by **Capt. John** » Mon Nov 03, 2014 7:01 pm

Does this filament work with the v3b hotend?
What temp does it print out at?

Shipping if Jim is nice enough to forward this filament would be 3 pounds from NJ.
That's around 10-12 bucks to MI.

I can ship Jim the right sized Priority Mail box for single spools, if needed.
This would save about 50 cents per customer.

jimc · Post by **jimc** » Mon Nov 03, 2014 7:11 pm

Hey john, i really have nothing to do with any of the shipping or anything like that. The filament isnt coming to me at all. I just happend to contact william at intservo for info on a release date for the stuff and he was nice enough to offer us a bit of a discount if i could get some people together. He said he will try and get more info on shipping as soon as possible. This will work with the v3b hot end. Temps are the same as abs

Rich · Post by **Rich** » Mon Nov 03, 2014 7:50 pm

Please have William count me in on a roll.

intservo · Post by **intservo** » Mon Nov 03, 2014 8:51 pm

Jimc and All,

Thanks for helping get all interested friends together. This is will at intservo. Here is a quick update on this.

1. the petg is 1kg/roll. both 1.75mm and 3mm are available. the 4 colors (Natural; Rubine red; Yellow; Reflex Blue)are available both 1.75 and 3.
......
6. you can send me ( admin@intservo.com) an email of your quantity and choice as early as you made decision. Likely the combined order will be out on Nov 15th, I receive it around Nov 25th and the goods should be at your door before Dec. 1st. You can pay us after I got the air freight.

Thank you all pioneers. Will keep this post updated if any updates.

UPDATE(11/06/2014):
I have collected all interests and submitted into queue. There is a good chance that we might be able to get it a few days earlier. I have dropped 3mm interests due to the reason that 3mm might have a delayed date.

UPDATE2(11/23/2014):
If any other guys would like to have one spool, please contact me. I have a few extra spools here.

Will

esun petg

Re: esun petg

Re: esun petg

Re: esun petg

Re: esun petg

Re: esun petg

Re: esun petg

Re: esun petg

Re: esun petg

Re: esun petg

Re: esun petg