NEW Carbon Fiber PLA and ABS
Posted: Mon Jan 05, 2015 5:43 pm
We launched our new grades of Carbon Fiber ABS and PLA. We did a lot of testing on these grades to make sure they had the properties we wanted. We are pretty excited about these - especially the PLA grade. Our data is highlighted on our blog. http://www.3dxtech.com/blog/
3DXMax™ CFR-PLA Highlights
9100 MPa Flexural Modulus (128% improvement over unfilled PLA; 31% improvement over competitor's 15% CF-PLA)
4711 MPa Tensile Modulus (64% improvement over unfilled PLA; 11% improvement over competitor's 15% CF-PLA)
And - all of our products include free shipping in the USA!
http://www.3dxtech.com/carbon-fiber-filament/
3DXMax™ CFR-PLA Highlights
9100 MPa Flexural Modulus (128% improvement over unfilled PLA; 31% improvement over competitor's 15% CF-PLA)
4711 MPa Tensile Modulus (64% improvement over unfilled PLA; 11% improvement over competitor's 15% CF-PLA)
And - all of our products include free shipping in the USA!
http://www.3dxtech.com/carbon-fiber-filament/
