Filament Discussions

The place to discuss filament...

Filament Discussions

Postby rpollack » Fri May 16, 2014 7:20 pm

You are welcome to discuss filaments you are using, techniques, strengths/weaknesses, etc. Please do not promote competitive products.
User avatar
rpollack
 
Posts: 452
Joined: Wed Apr 09, 2014 9:01 pm
Location: Beachwood, OH

Re: Filament Discussions

Postby davycroc » Wed Jan 21, 2015 2:16 am

NinjaFlex 3mm
250-260C
0.2mm layer height with an .050 nozzle
20mm/sec max speed

This has to print very slowly, the NinjaFlex doesn't melt very fast, and trying to cram too much of it into the extruder just jams up.
But, if you are patient, you can print some really neat stuff, like the adipose from Dr. Who (2005).

Watch the infill, if you do support only, it squeezes "funny".
Do a light infill for squeezability (<25%), and more (>50%) for a "firmer" feel.

If you are doing repeated flexing, make the walls thicker to handle the inevitable layer separation.
davycroc
 
Posts: 7
Joined: Mon Apr 14, 2014 11:59 pm


Return to Filament

Who is online

Users browsing this forum: No registered users and 6 guests