ColorFabb copperfill

The place to discuss filament...
Post Reply
Posts: 2
Joined: Sat Apr 11, 2015 1:43 am

ColorFabb copperfill

Post by Wjdoy » Thu May 28, 2015 1:16 am

Has anyone tried ColorFabb copperFill Metal Filament? I'm interested in trying this in my M2.

Posts: 4
Joined: Sat Jul 04, 2015 7:47 am

Re: ColorFabb copperfill

Post by Msculpt » Tue Aug 18, 2015 5:54 am

I tried some with the stock extruder mount and V3b and the teeth on the drive gear absolutely shredded the filament no matter how the tension was set, made a mess and ultimately caused a number of other issues. I now have an E3dV6 but have not tried again. I will give it a shot sometime soon, I need it to work. Worst case scenario I was considering trying to mount a different drive gear if I can find or make one with the correct bore.
I would be happy to hear anyone else's experience and/or super easy fix I didn't think of which will work perfectly the first time I try :)

User avatar
Posts: 2888
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj

Re: ColorFabb copperfill

Post by jimc » Tue Aug 18, 2015 12:02 pm

Reprapper makes copperfill as well. I have a spool if that and it prints super clean and smooth.

Post Reply