how
pls
It does not bridge. I need it to bridge at least an inch.
Printing 15mm/sec @ 0.5mm nozzle, 0.2mm layers, 250C, 80C steel bed with hairspray, 1.38 extrusion multiplier. I cannot find any combination of bridging multiplier and speed that causes the threads to not break off or sag straight down.
NinjaFlex bridging (serious ninjaflex post this time)
NinjaFlex bridging (serious ninjaflex post this time)
Custom 3D printing for you or your business -- quote [at] pingring.org
Re: NinjaFlex bridging (serious ninjaflex post this time)
You using S3D?
Re: NinjaFlex bridging (serious ninjaflex post this time)
Yep, but I'm not married to it.
Custom 3D printing for you or your business -- quote [at] pingring.org
Re: NinjaFlex bridging (serious ninjaflex post this time)
Try increasing these:
Bridging Extrusion Multiplier: 150%
Extra inflation distance: 1.0 mm
Bridging Speed Multiplier: 150%
And lower the unsupported area threshold to 2 mm.
Might not work, but those a similar to what i experimented with in PETG, and the ninja has got to be worse than that.
Bridging Extrusion Multiplier: 150%
Extra inflation distance: 1.0 mm
Bridging Speed Multiplier: 150%
And lower the unsupported area threshold to 2 mm.
Might not work, but those a similar to what i experimented with in PETG, and the ninja has got to be worse than that.
Re: NinjaFlex bridging (serious ninjaflex post this time)
Caused a buckle (plastic going too fast)
Custom 3D printing for you or your business -- quote [at] pingring.org
Re: NinjaFlex bridging (serious ninjaflex post this time)
Whoops! (Maybe designing some manual support?)
Re: NinjaFlex bridging (serious ninjaflex post this time)
Right now I'm printing bridging torture tests ... I can do 20mm "passably", but fails pretty hardcore on 30mm.
Custom 3D printing for you or your business -- quote [at] pingring.org
Re: NinjaFlex bridging (serious ninjaflex post this time)
waiting to see what you come up with here. bridging was one thing i have never really needed to do with ninjaflex.......yet
Re: NinjaFlex bridging (serious ninjaflex post this time)
I didn't get anywhere. I'm back to thinking that Ninjaflex is hateful
Custom 3D printing for you or your business -- quote [at] pingring.org