Any heat resistant Plastics for GPS bracket in a boat?

The place to discuss filament...
User avatar
Matt_Sharkey
Posts: 347
Joined: Mon Oct 20, 2014 3:10 pm

Re: Any heat resistant Plastics for GPS bracket in a boat?

Post by Matt_Sharkey » Sun Sep 11, 2016 4:33 pm

PLA will never have the heat resistance that other plastics have. People like PLA because it prints so fast and easily at a low temp. It is great for draft work and toys. But these qualities make it more susceptible to heat issues. I believe the best progress you could make is to increase it's glass temperature (which starts at like 120F) but maintain the melting temp.

Phil
Posts: 214
Joined: Mon Sep 19, 2016 7:49 pm

Re: Any heat resistant Plastics for GPS bracket in a boat?

Post by Phil » Wed Nov 16, 2016 11:01 pm

hybridprinter wrote:Why do people even use ABS anymore? And why even use PLA? It seems that PETG renders them both obsolete?
For one thing, the specific gravities are different. ABS=1.05, PLA=1.25, PETG=1.38.
For another, I tried to print with PETG on my Afinia printer. It has settings for PLA and ABS. The PLA setting was too cool, and the extrusion was too slow. The ABS setting was too hot and the filament came out almost burnt. (PETG works great in my new M2, though.)

Post Reply