Input Requested: What are your favorite filaments?
Input Requested: What are your favorite filaments?
We are looking at expanding our filament offering (as the M2 prints in many materials beyond PLA and ABS) and would like to gather the opinions of the community:
1. What is your most commonly used filament grade and manufacturer?
2. How would you rate its ease of use (scale of 1 - 5, 5 being easiest)?
3. What are some of your other favorites and their ease of use?
4. What information would you like MakerGear to provide for getting started with any particular filament grade?
Thank you for your help!
Ryan
1. What is your most commonly used filament grade and manufacturer?
2. How would you rate its ease of use (scale of 1 - 5, 5 being easiest)?
3. What are some of your other favorites and their ease of use?
4. What information would you like MakerGear to provide for getting started with any particular filament grade?
Thank you for your help!
Ryan
Re: Input Requested: What are your favorite filaments?
The above post is from Ryan at MakerGear.
Re: Input Requested: What are your favorite filaments?
I know this is really not useful but the filament industry is so cut throat and the margins are so slim to even compete, is it even worth offering filament other than the one spool included with the printer?
Re: Input Requested: What are your favorite filaments?
PETG seems to be pretty popular as an alternative to those who don't want to use ABS.
Re: Input Requested: What are your favorite filaments?
jim - that is part of the reason that we have not been doing it. but we also sell a fair amount of filament and some customers only (or mostly) get their filament from us (and some buy a lot). So, we are looking into building-out our offering of MakerGear filament.
Re: Input Requested: What are your favorite filaments?
I really like the "+" offerings from eSUN (ABS+/PLA+), and the "++" offerings from Breathe-3dp (PLA++). Breathe is domestic, eSUN is well-known. Both are very nice. They are, however, ultimately PLA and ABS, although much nicer than I'm used to. The PLA's from both offerings are more heat tolerant, ridiculously strong, and "just work". They're a 6/5 on ease-of-use. I did no calibration, just dropped them in and ran with it, and made some of my strongest and best looking parts without really even trying.
I use a good amount of natural HIPS as well, it's actually a nice printing material. It's probably a 3/5, hairspray on kapton at 85C. I actually find PET/PETG a bit harder to work with, mostly because it's so persnickety about calibration and first layer. Support with HIPS (even as single-extrusion) is a breeze.
Regular ABS sucks. Never carry it.
If you want a "done-in-one" thing though, carry Taulman's products. You can skip Bridge and 230. All the Nylons stick great to bare glass + 50/50 elmers/water brushed on, at 45C. n-vent is an easy-to-use PLA as well. The flexy one is a stiffer ninjaflex. They are all self-cleaning in the hotend. The V4 loves them all.
I use a good amount of natural HIPS as well, it's actually a nice printing material. It's probably a 3/5, hairspray on kapton at 85C. I actually find PET/PETG a bit harder to work with, mostly because it's so persnickety about calibration and first layer. Support with HIPS (even as single-extrusion) is a breeze.
Regular ABS sucks. Never carry it.
If you want a "done-in-one" thing though, carry Taulman's products. You can skip Bridge and 230. All the Nylons stick great to bare glass + 50/50 elmers/water brushed on, at 45C. n-vent is an easy-to-use PLA as well. The flexy one is a stiffer ninjaflex. They are all self-cleaning in the hotend. The V4 loves them all.
Custom 3D printing for you or your business -- quote [at] pingring.org
-
- Posts: 98
- Joined: Tue Jul 21, 2015 12:49 am
Re: Input Requested: What are your favorite filaments?
Maker Geeks PETG is very, very good. I have used eSun Petg which worked ok, but Maker Geeks IMHO is much better!
Re: Input Requested: What are your favorite filaments?
I use a lot of eSun PLA and ABS, but also a lot of 3D Solutech PLA (which is made in the USA).
Re: Input Requested: What are your favorite filaments?
I used AzureFIlm PET-G and WOOD filament and both did an awesome job, great printability and wood filament really smells like wood i am very happy with this filaments
http://www.azurefilm.com/shop/pla-0000-wood/
http://www.azurefilm.com/3d-filament-pet-g/
http://www.azurefilm.com/shop/pla-0000-wood/
http://www.azurefilm.com/3d-filament-pet-g/
Re: Input Requested: What are your favorite filaments?
^_^ i like cute filament
like fluorescent one or wood one metal one copper one
i buy white and black from you guys because i like to support Makergear if you had Wood/metal/fluorescent I would buy it all from you but as architect i really small quantity of many different color/type
so i don't think i am the best customer to ask advice to
what you can improve probably is more transparent one everybody like transparent and i don't use ABS only PLA or PETG
like fluorescent one or wood one metal one copper one
i buy white and black from you guys because i like to support Makergear if you had Wood/metal/fluorescent I would buy it all from you but as architect i really small quantity of many different color/type
so i don't think i am the best customer to ask advice to
what you can improve probably is more transparent one everybody like transparent and i don't use ABS only PLA or PETG