What are the best flexible filaments?

The place to discuss filament...

What are the best flexible filaments?

Postby psd » Sat May 06, 2017 8:07 am

Has anyone tried the variety of flexible filaments out there?
I see mixed review of ninjaflex and I know eSun has two different offerings, and saw one or two others.
Anyone getting good results with any of them?
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 181
Joined: Tue Mar 08, 2016 9:09 pm

Re: What are the best flexible filaments?

Postby jimc » Sun May 07, 2017 2:45 am

really the best stuff out there is ninjaflex for the softer materials. only drawback is fenner is extremely proud of it as you can see with the price. esun has a few with different properties. i believe the eflex is the one that is very much like ninjaflex. its rubber band like. stretch it and it springs right back. the others are different. they stretch but dont rebound in the same way.
User avatar
jimc
 
Posts: 2884
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj

Re: What are the best flexible filaments?

Postby psd » Sun May 07, 2017 3:16 am

Thanks Jim,
Which give the cleanest print?
Which are most dependable to print well?
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 181
Joined: Tue Mar 08, 2016 9:09 pm

Re: What are the best flexible filaments?

Postby psd » Sun May 07, 2017 3:18 am

Btw, has anyone created print profiles or settings for the eSun eflex?
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 181
Joined: Tue Mar 08, 2016 9:09 pm

Re: What are the best flexible filaments?

Postby jimc » Sun May 07, 2017 3:27 am

if you dont need super soft material then cheetah will give you much cleaner prints. any of the real soft ones like ninjaflex take some trial and error to get right. you really cant print super clean with them since retraction basically doesnt work. they will ooze all over the place during travel moves. cheetah is stiffer and will retract.

psd, its been a long time but if i remember right the eflex had setting almost the same as ninjaflex.
User avatar
jimc
 
Posts: 2884
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj

Re: What are the best flexible filaments?

Postby Phil » Sun May 07, 2017 2:34 pm

I have used several flexible filaments. You can read about them on "Insta's Filaments That Work on the M2" thread.
Phil
 
Posts: 155
Joined: Mon Sep 19, 2016 7:49 pm

Re: What are the best flexible filaments?

Postby psd » Tue May 09, 2017 1:47 pm

Thank Gillian, any setting tips?
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 181
Joined: Tue Mar 08, 2016 9:09 pm

Re: What are the best flexible filaments?

Postby billc » Sat Oct 07, 2017 3:46 am

I did my first print with Cheetah last night. I used my (Jules mostly) PETG settings with modifications indicated by Cheetah specs (temperature, etc).
I was very surprised to get a nice print - simple rectangle on the first try. I expected to have to make several attempts. I'm looking forward to doing something more complex this weekend - a drone housing for a GoPro. Anyone have advice for bridging success with Cheetah? Also on an M3

I added the picture. ragged edges are support that hasn't been pulled off. Support comes off nicely. Was necessary due to small height differences between the top and bottom parts that are connected. We aren't sure what the hood-like piece is... just came with the stl.
Attachments
drone_mount Cheetah filament.jpg
Last edited by billc on Thu Oct 12, 2017 4:10 pm, edited 2 times in total.
billc
 
Posts: 9
Joined: Sun Mar 27, 2016 12:33 am
Location: Ann Arbor, Mi

Re: What are the best flexible filaments?

Postby jimc » Sat Oct 07, 2017 3:52 am

Cheetah bridges super easy. Really you dont need any special settings.
User avatar
jimc
 
Posts: 2884
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj

Re: What are the best flexible filaments?

Postby psd » Sat Oct 07, 2017 4:29 am

Super, I will pick up some cheers too.
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 181
Joined: Tue Mar 08, 2016 9:09 pm

Next

Return to Filament

Who is online

Users browsing this forum: No registered users and 3 guests