3D Printed: Nema 17 5:1 Top Clamp

Ask your kit assembly questions here...

3D Printed: Nema 17 5:1 Top Clamp

Postby lightmind » Thu Feb 04, 2016 11:38 pm

Hello,

The clamp for the filament feed motor has broken after the extruder assembly got caught on the bed clamps. The mount is loose and cannot be tightened.

According to the drawings it is listed as "3D Printed: Nema 17 5:1 Top Clamp".

Since it is a printed part, anyone know where I can get the STL file?
lightmind
 
Posts: 1
Joined: Thu Feb 04, 2016 11:34 pm

Re: 3D Printed: Nema 17 5:1 Top Clamp

Postby jsc » Fri Feb 05, 2016 3:45 am

http://makergear.wikidot.com/m2-components

See if you can repair your existing one enough with epoxy or superglue or zip ties long enough to get another one printed. You will want to use a high temp filament, like ABS or PETG.
jsc
 
Posts: 1862
Joined: Thu Apr 10, 2014 4:00 am

Re: 3D Printed: Nema 17 5:1 Top Clamp

Postby willnewton » Fri Feb 05, 2016 7:27 am

I'm finally back to where I started two days ago!

A thread with some stuff in it I update every once in a while. http://forum.makergear.com/viewtopic.php?f=8&t=9
See some of my stuff http://www.thingiverse.com/willnewton/about
User avatar
willnewton
 
Posts: 433
Joined: Wed Apr 09, 2014 8:32 pm

Re: 3D Printed: Nema 17 5:1 Top Clamp

Postby Farr0wn3d » Fri Feb 05, 2016 6:46 pm

I have the metal motor mount and in addition to being more sturdy, it just looks great haha
User avatar
Farr0wn3d
 
Posts: 290
Joined: Tue Mar 31, 2015 4:16 am
Location: Calgary, Alberta, Canada


Return to Kit Assembly

Who is online

Users browsing this forum: No registered users and 1 guest

cron