Hello:
I am interested in the dual extruder and I was wondering if I could use it to print in 2 different nozzle sizes
I am thinking I would put a .25 on one and a .5 on the other...
This way I can use the .25 (by itself) to do very fine prints and the .5 (by itself) to do the fast-draft prints
In addition I would like to use BOTH at the same time the .25 to do the actual prints and .5 simultaneously to print HIPS support material when I am doing prints.
Does this make sense?
Are different nozzle sizes available for v4 hotends?
Best,
Estefano
Dual Extruder with different nozzle size
Re: Dual Extruder with different nozzle size
This is 100% doable, but I don't know if a 0.25mm is available for the V4. The 0.35 is still pretty fine.
Custom 3D printing for you or your business -- quote [at] pingring.org