Dual Extruder with different nozzle size
Posted: Mon Sep 14, 2015 5:18 am
Hello:
I am interested in the dual extruder and I was wondering if I could use it to print in 2 different nozzle sizes
I am thinking I would put a .25 on one and a .5 on the other...
This way I can use the .25 (by itself) to do very fine prints and the .5 (by itself) to do the fast-draft prints
In addition I would like to use BOTH at the same time the .25 to do the actual prints and .5 simultaneously to print HIPS support material when I am doing prints.
Does this make sense?
Are different nozzle sizes available for v4 hotends?
Best,
Estefano
I am interested in the dual extruder and I was wondering if I could use it to print in 2 different nozzle sizes
I am thinking I would put a .25 on one and a .5 on the other...
This way I can use the .25 (by itself) to do very fine prints and the .5 (by itself) to do the fast-draft prints
In addition I would like to use BOTH at the same time the .25 to do the actual prints and .5 simultaneously to print HIPS support material when I am doing prints.
Does this make sense?
Are different nozzle sizes available for v4 hotends?
Best,
Estefano