Invalid T1?

The official subforum for discussion of the installation and use of the official M2 Dual Extruder upgrade.
Post Reply
Justintime804
Posts: 3
Joined: Fri Apr 15, 2016 11:08 pm

Invalid T1?

Post by Justintime804 » Sat Apr 16, 2016 10:28 pm

Just upgraded to the dual extruder kit.

I have a REV E Model and I just uploaded ME2-Prodution-SnNrd-V100 and now my T1 (right extruder) keeps showing as invalid....

Please help.....

no3dprintexperience
Posts: 17
Joined: Mon Mar 14, 2016 2:03 am

Re: Invalid T1?

Post by no3dprintexperience » Sun Apr 17, 2016 4:30 am

I had this exact same problem. Jules helped me solve it - you need firmware version 101. You can find it in the thread about Dual w/ LCD screens. Good luck!

User avatar
Jules
Posts: 3144
Joined: Wed Jan 21, 2015 1:36 am

Re: Invalid T1?

Post by Jules » Sun Apr 17, 2016 4:58 am

Just to make sure you have the right one, cause there are several in that thread:
M2E-Production-SnNRd-V101 - Dual.zip
(1.06 MiB) Downloaded 397 times

Post Reply