M2 Rev. E Dual Extruder Firmware

The official subforum for discussion of the installation and use of the official M2 Dual Extruder upgrade.
Post Reply
User avatar
Jules
Posts: 3144
Joined: Wed Jan 21, 2015 1:36 am

M2 Rev. E Dual Extruder Firmware

Post by Jules » Sun Apr 17, 2016 5:01 am

If you are having trouble with the new Rev.E machines recognizing the T1 extruder after installing the firmware recommended in the installation instructions, use the firmware below:
(Remember to use the 1.5.5 version of Arduino to flash the firmware.)
M2E-Production-SnNRd-V101 - Dual.zip
(1.06 MiB) Downloaded 467 times
Last edited by Jules on Wed May 18, 2016 8:34 pm, edited 1 time in total.
Top
User avatar
Farr0wn3d
Posts: 319
Joined: Tue Mar 31, 2015 4:16 am
Location: Calgary, Alberta, Canada

Re: M2 Rev. E Dual Extruder Firmware

Post by Farr0wn3d » Wed May 18, 2016 8:09 pm

I hadnt tried that, I'm using the ones on the MG Wiki. I tried compiling the one you posted but I'm getting an error. The other issue I have is that I can get a version that will run the dual, and use the inverted z endstop but not the LCD. Other versions will do the LCD and inverted Z but not the dual. lol
Top
User avatar
Farr0wn3d
Posts: 319
Joined: Tue Mar 31, 2015 4:16 am
Location: Calgary, Alberta, Canada

Re: M2 Rev. E Dual Extruder Firmware

Post by Farr0wn3d » Wed May 18, 2016 8:17 pm

OKAY, so uninstalling the new arduino version and installing the v1.5.5 and loading the firmware you provided works. Now my only question is how to you set the z height if theres no bolt to adjust for hitting the endstop??
Top
User avatar
Jules
Posts: 3144
Joined: Wed Jan 21, 2015 1:36 am

Re: M2 Rev. E Dual Extruder Firmware

Post by Jules » Wed May 18, 2016 8:28 pm

Farr0wn3d wrote:OKAY, so uninstalling the new arduino version and installing the v1.5.5 and loading the firmware you provided works. Now my only question is how to you set the z height if theres no bolt to adjust for hitting the endstop??

You don't... the little app sets a "Starting Height" now, and from that point on - it's automatic.

viewtopic.php?f=3&t=3542

;)
Top
User avatar
Farr0wn3d
Posts: 319
Joined: Tue Mar 31, 2015 4:16 am
Location: Calgary, Alberta, Canada

Re: M2 Rev. E Dual Extruder Firmware

Post by Farr0wn3d » Wed May 18, 2016 8:44 pm

Does that app adjust a value in the firmware?
Top
User avatar
Jules
Posts: 3144
Joined: Wed Jan 21, 2015 1:36 am

Re: M2 Rev. E Dual Extruder Firmware

Post by Jules » Wed May 18, 2016 9:04 pm

Farr0wn3d wrote:Does that app adjust a value in the firmware?


Yep! It sets it.
Top
User avatar
Farr0wn3d
Posts: 319
Joined: Tue Mar 31, 2015 4:16 am
Location: Calgary, Alberta, Canada

Re: M2 Rev. E Dual Extruder Firmware

Post by Farr0wn3d » Wed May 18, 2016 9:12 pm

Whats the value called so I can edit it myself in the firmware?
Top
User avatar
Jules
Posts: 3144
Joined: Wed Jan 21, 2015 1:36 am

Re: M2 Rev. E Dual Extruder Firmware

Post by Jules » Wed May 18, 2016 9:54 pm

ROFL! No idea! I use the App. :lol:

Here's the thread where the guys who know what they are doing worked it out:

viewtopic.php?f=10&t=3072
Top
User avatar
zemlin
Posts: 467
Joined: Thu Feb 04, 2016 9:32 pm
Location: Indianapolis, Indiana

Re: M2 Rev. E Dual Extruder Firmware

Post by zemlin » Thu May 19, 2016 2:55 am

Farr0wn3d wrote:Whats the value called so I can edit it myself in the firmware?
This might be the info you're looking for
viewtopic.php?f=3&t=3631
Top
Post Reply

Return to “M2 Dual Extruder”