Led lights

Other stuff you would like to discuss...

Led lights

Postby Pekish79 » Fri Dec 18, 2015 9:41 pm

I have been trying to lit my new model with some tiny battery powered led lights

so far in my research
http://www.extremeglow.com/store/p/27-F ... -Pack.aspx

i removed the mirror paper and bent it like in the picture now is 3/4" x 7/8" x more or less 2/5 thick
Image
anyone has used anything smaller

in the same place they sell the (1/2" round x1/2" thick)
http://www.extremeglow.com/store/p/32-B ... ights.aspx
unfortunately they only blink i need steady light
User avatar
Pekish79
 
Posts: 185
Joined: Fri Oct 09, 2015 4:04 pm

Re: Led lights

Postby Tim » Fri Dec 18, 2015 11:28 pm

LED tea lights come to mind as being what I've seen other people use on projects, but you appear to have already found a solution that is much smaller than that.

Once long ago I used to use grain-of-rice bulbs for lighted model projects, but the LEDs, even if they are a bit bigger, are oh-so-much more convenient with their built-in batteries. Still, your size is always going to be limited by the battery if you do it that way. As long as you can tolerate wiring, it can be as small as you need. . .
User avatar
Tim
 
Posts: 1188
Joined: Thu Apr 10, 2014 2:19 pm
Location: Poolesville, Maryland

Re: Led lights

Postby Pekish79 » Sat Dec 19, 2015 12:36 am

yeah u was trying to avoid the wiring thing this is a quick model solution for competition it wont last long and is not made to be given to the client so I don't want to make a system that will stay there but something i can put in there and remove to use it on next project

but i appreciate the advice ^_^ the more way i learn the better
User avatar
Pekish79
 
Posts: 185
Joined: Fri Oct 09, 2015 4:04 pm

Re: Led lights

Postby Jules » Sat Dec 19, 2015 1:20 am

There are balloon lights that are smaller than the LED tea lights, but they look larger than what you are using there:

http://www.amazon.com/gp/product/B00JSH ... 1_3&sr=8-3
User avatar
Jules
 
Posts: 3150
Joined: Wed Jan 21, 2015 1:36 am

Re: Led lights

Postby Pekish79 » Sat Dec 19, 2015 1:53 am

they would look good in some sci-fi model ehehe
User avatar
Pekish79
 
Posts: 185
Joined: Fri Oct 09, 2015 4:04 pm

Re: Led lights

Postby vesteroid » Wed Jan 04, 2017 11:32 pm

This kit shows what I would think would work.

I dont have one at my desk, but I bet they are about .200" across?

I know thats a kit but shows what led I was thinking of. I just did a search on bread board led and found that

https://www.amazon.com/Elegoo-EL-CK-002 ... breadboard
vesteroid
 
Posts: 29
Joined: Tue Jan 03, 2017 4:45 am


Return to Other (off topic)

Who is online

Users browsing this forum: No registered users and 2 guests