Thermal Images of M2

Other stuff you would like to discuss...
Post Reply
warrenm
Posts: 1
Joined: Tue Mar 29, 2016 2:04 am

Thermal Images of M2

Post by warrenm » Wed Mar 30, 2016 3:50 am

I took some thermal images of the M2 with the heaters on, mostly to see how consistently heated the bed is and what sort of effect the buildtak has on the bed temperature. These images include an overlaid visible-light outline, which is why the M2/MAKERGEAR lettering is showing up. The 205c extruder is outside the 150c limit of the thermal sensor.
FLIR0005.png
Full unit, bed heated to 60c, extruder heated to 205c
FLIR0005.png (144.2 KiB) Viewed 5431 times
FLIR0004.png
Bed heater set to 60c, buildtak-covered glass installed
FLIR0004.png (127 KiB) Viewed 5431 times
FLIR0003.png
Bed heater set to 60c, bare plate
FLIR0003.png (133.64 KiB) Viewed 5431 times
Enjoy!

Post Reply