The last of the MIC6 beds for now!

A resource for used MakerGear equipment.
Post Reply
User avatar
insta
Posts: 2018
Joined: Tue Sep 16, 2014 3:59 am

The last of the MIC6 beds for now!

Post by insta » Tue Feb 28, 2017 5:56 am

I have 14 total, some are as cheap as $40 (the used, narrow sheets). They will fit in the Rev E machines, they're only about 1/8" narrower than a full-size sheet. All the skinny sheets are bead-blasted, and 1 of the full-size used sheets is bead-blasted too. All the used sheets are straight from my production machines, and come "preapplied" with hairspray or beat-up Kapton (read: I'm too lazy to wash it off).

I will also consider trades for stock borosilicate plates, at a trade-rate of $15 per plate.


http://pingring.org/parts-hardware/
Custom 3D printing for you or your business -- quote [at] pingring.org

3dPrintingMD
Posts: 279
Joined: Fri Oct 02, 2015 5:37 am

Re: The last of the MIC6 beds for now!

Post by 3dPrintingMD » Tue Feb 28, 2017 6:39 pm

Awesome, I just snagged that Full Size Used Beadblasted one!
M2 - V4, MIC-6 Build Plate, Astrosyn Damper's(X/Y), Rev. E, Geeetech LCD

S3D - FFF Settings https://forum.simplify3d.com/viewtopic.php?f=8&t=2367
Print Quality Troubleshooting https://www.simplify3d.com/support/prin ... eshooting/

User avatar
insta
Posts: 2018
Joined: Tue Sep 16, 2014 3:59 am

Re: The last of the MIC6 beds for now!

Post by insta » Tue Feb 28, 2017 7:28 pm

No more scuffed PEI beds.
Custom 3D printing for you or your business -- quote [at] pingring.org

User avatar
insta
Posts: 2018
Joined: Tue Sep 16, 2014 3:59 am

Re: The last of the MIC6 beds for now!

Post by insta » Mon Apr 10, 2017 3:15 am

Bump. Still a good handful available. Most are sans PEI. Make offers, at this point.

Boro-trades are still OK.
Custom 3D printing for you or your business -- quote [at] pingring.org

Post Reply