M3SE BL Touch Probe Upgrade

The place to discuss the M3-SE
Post Reply
polygonprint
Posts: 15
Joined: Thu Jul 26, 2018 2:38 am

M3SE BL Touch Probe Upgrade

Post by polygonprint » Sat Mar 02, 2019 4:40 am

Hi All,

I have noticed there is a M3 ID probe upgrade kit available from the Makergear store. Will this upgrade work on the M3 SE? If not, I'm a little curious to know why there is no M3 SE kit available? Thanks.

makeal
Posts: 73
Joined: Sat Aug 25, 2018 2:13 pm

Re: M3SE BL Touch Probe Upgrade

Post by makeal » Sun Mar 03, 2019 11:41 pm

Someone on the mosaic fb group just bought a M3-SE printer from makergear and it came with the probe attached so it seems that makergear is selling printers with it. Just not sure if its available as a upgrade option. Reach out to makergear and ask them. Mounting plate on ID is different from SE so it might work on SE but you will need to print the belt holder for it

polygonprint
Posts: 15
Joined: Thu Jul 26, 2018 2:38 am

Re: M3SE BL Touch Probe Upgrade

Post by polygonprint » Mon Mar 04, 2019 2:32 am

makeal - appreciate you letting me know about the SE with the probe. I will contact Makergear as suggested.

GlennK
Posts: 3
Joined: Wed Oct 24, 2018 5:51 pm

Re: M3SE BL Touch Probe Upgrade

Post by GlennK » Sat Mar 09, 2019 6:02 pm

Tried to find some info about it via Google and failed, could you share a response from Makegear if it is possible?

polygonprint
Posts: 15
Joined: Thu Jul 26, 2018 2:38 am

Re: M3SE BL Touch Probe Upgrade

Post by polygonprint » Sun Mar 10, 2019 9:30 am

Hi Glen,

I did ask about the compatibility of the ID probe upgrade and unfortunately they are not compatible with the SE. However, they are working on a upgrade for the M3 SE Rev0. That's as much information as I was told, so I am not sure what the upgrade will include.

Post Reply