Printing with Right head, T1

The place to discuss the M3-ID

Printing with Right head, T1

Postby spatterfree » Tue Feb 06, 2018 3:18 am

Hi, can't figure out what i need to do to get this printer to print only with the right head,
every time i try the left head purges and sits in the way, when it's the right sides turn they crash together,
i tried to connect to M3 only and not the ID,
in simplify 3d i took a profile that has everything T1 and nothing left side, still it's doing that.
im getting a little annoyed because i repeatedly crashed the heads trying out differnt ways to do this.
anybody here that tried that? please advice.
thanks,
spatterfree
 
Posts: 8
Joined: Tue Feb 06, 2018 3:09 am

Re: Printing with Right head, T1

Postby spatterfree » Tue Feb 06, 2018 3:47 pm

Ok, i found the profile and now i finally got it to work,
it's printing fine, but in octoprint, im assuming the left hottend temp is being displayed, i have no control over the Right Hotend.
spatterfree
 
Posts: 8
Joined: Tue Feb 06, 2018 3:09 am

Re: Printing with Right head, T1

Postby Hugs » Tue Feb 06, 2018 5:19 pm

spatterfree wrote:[...]but in octoprint, im assuming the left hottend temp is being displayed, i have no control over the Right Hotend.


I'm being Captain Obvious here, but did you set the number of extruders to 2 in the Octoprint printer profile?

dual-extuders.PNG


You should see both extruders in the Control tab:

dual-control.PNG
Hugs
 
Posts: 85
Joined: Tue Mar 08, 2016 11:16 pm
Location: Pennsylvania

Re: Printing with Right head, T1

Postby spatterfree » Tue Feb 06, 2018 5:27 pm

no, i didn't, i made a profile for right extruder only.
Attachments
Screen Shot 2018-02-06 at 8.39.45 AM.png
spatterfree
 
Posts: 8
Joined: Tue Feb 06, 2018 3:09 am

Re: Printing with Right head, T1

Postby jk42 » Wed Feb 07, 2018 5:41 pm

Did you download the M3 profiles for Simplify3D from the M3 Knowledge base?
https://makergear.zendesk.com/hc/en-us
~Jason from MakerGear
jk42
 
Posts: 38
Joined: Mon Oct 09, 2017 5:19 pm


Return to M3-ID

Who is online

Users browsing this forum: No registered users and 1 guest