IGLIDE PF filament (and print quality)

General discussion topics
Post Reply
mhandley
Posts: 8
Joined: Wed May 07, 2014 4:51 am

IGLIDE PF filament (and print quality)

Post by mhandley » Tue Jul 24, 2018 9:10 pm

Does anyone have experience and advice for using the PF filament?
I do have the recommended mat for adhesion.

I have an M2 with a V4 upgrade Using Simplify 3d

I'm going to be printing these small parts. The actual printing will be from separate stl files which I continue to modify in small ways
I have already printed a PLA version that seems like it will work
The "shafts" shown will actually be Stainless steel
They will automatically close 3/4" thick small doors that have been opened 170°in museum displays

The curved surfaces will be friction/wear points so I'm trying to get the best quality that I can especially on the top shell.
Any helpful advice on this?
Attachments
dun doors.stl
(1.12 MiB) Downloaded 27 times

Phil
Posts: 184
Joined: Mon Sep 19, 2016 7:49 pm

Re: IGLIDE PF filament (and print quality)

Post by Phil » Thu Aug 02, 2018 10:51 pm


Post Reply