I haven't been following this thread too closely since I haven't printed in ABS. If you want help from Makergear, the way to go is through their support email. This is the user group so the help you'll get here will be from other users. Rick only occasionally steps in if someone is obviously having a hardware issue, and then he just says "Contact Makergear support."Capt. John wrote:I'll have to review the replies, but don't see admin from Makergear stepping in to help.
This is not what the Amazon reviews said. Instead, help is provided by fellow members with the
best intentions to help others. For this I thank all who offered their help to me.
In the S3D program FFF settings under scripts there's a bugaboo.
M108 S255 ; turn on M2 fans (this was M108 S155 until I changed it) for the number 3b hot end.
G28 ; home all axes
G1 Y50 Z0.3 F9600 ; move forward to avoid binder clips
G1 X205 Z10 ; move off platform
G1 Z0.4 ; position nozzle
G92 E0 ; zero extruder
G1 E25 F250 ; purge nozzle <------- this was set low at F225, moved it to F250, shouldn't it be C250?
G92 E0 ; zero extruder
G1 X190 Z0.1 E1.0 F1200 ; slow wipe
G1 X180 Z0.25 ; lift
Thanks for your help beforehand
In terms of the startup script, that F225 in the G1 command isn't about temperature, it's feed rate. (Under the circumstances that was a reasonable guess on your part though.) There are various places to find descriptions of the G-code commands. If you search under "Marlin G-code" or the like I think you'll find it. If not let me know and I'll see if I can dig something up.