General discussion topics
Post Reply
Posts: 76
Joined: Thu Apr 10, 2014 12:07 pm


Post by KeithA » Tue Apr 29, 2014 5:08 am

Can anyone provide me with a maintenance guide for the M2? I was wondering what needs to be checked & lubed as well as how often the procedure is suggested.


Posts: 330
Joined: Wed Apr 09, 2014 9:44 pm

Re: Maintenance

Post by Toby » Tue Apr 29, 2014 11:00 am

I've just been following the instructions on the brightly colored "Important" paper that came with the printer.

In summary it says: the linear shafting (long steel rods) should have a coating of 3-in-1 oil (not included with the M2), and the linear rails should be lubricated with a dab of the included lithium grease every 90 days, or more often if the printer is heavily used.

Post Reply