Can anyone provide me with a maintenance guide for the M2? I was wondering what needs to be checked & lubed as well as how often the procedure is suggested.
Thanks
Maintenance
Re: Maintenance
I've just been following the instructions on the brightly colored "Important" paper that came with the printer.
In summary it says: the linear shafting (long steel rods) should have a coating of 3-in-1 oil (not included with the M2), and the linear rails should be lubricated with a dab of the included lithium grease every 90 days, or more often if the printer is heavily used.
In summary it says: the linear shafting (long steel rods) should have a coating of 3-in-1 oil (not included with the M2), and the linear rails should be lubricated with a dab of the included lithium grease every 90 days, or more often if the printer is heavily used.