Another new M2

mattrsch · Post by **mattrsch** » Wed Jan 14, 2015 1:12 am

I have been lurking in these forums for a couple months or so while I was narrowing down my choices of what 3D printer to buy to replace the workable-but-not-great one I built a couple years ago. I finally settled on the M2, and after I took the frame out of the box today there is no doubt in my mind I made the right decision. That thing is solid!

A large part of my decision was based off what I learned browsing through these forums, so I just wanted to give a quick thanks to all you helpful people. Happy printing!

Capt. John · Post by **Capt. John** » Wed Jan 14, 2015 2:10 am

Welcome and a wise decision on your part. M2s are rock solid.

Info from the advanced members here has helped me tremendously.
So, don't hesitate to ask for help.

jimc · Post by **jimc** » Wed Jan 14, 2015 2:31 am

hi matt and welcome

Another new M2

Another new M2

Re: Another new M2

Re: Another new M2