Thermal time-lapse video of M2 bed heating up

General discussion topics
Post Reply
Hugs
Posts: 87
Joined: Tue Mar 08, 2016 11:16 pm
Location: Pennsylvania

Thermal time-lapse video of M2 bed heating up

Post by Hugs » Sat Mar 12, 2016 9:04 pm

Just for fun, I recorded a thermal video of the HBP heating up and created a 30 second time-lapse:

https://www.youtube.com/watch?v=nVG_VjhfTRI

Blurb from YouTube:
Recorded with a FLIR ONE (the flashes/blips are the FLIR recalibrating itself).

I didn't tweak any emissivity settings so the indicated temperature will be off by a few degrees.

User avatar
PcS
Posts: 667
Joined: Mon Mar 09, 2015 12:19 pm
Location: Michigan

Re: Thermal time-lapse video of M2 bed heating up

Post by PcS » Sat Mar 12, 2016 9:13 pm

Interesting ! thanks for sharing !

Slipshine
Posts: 182
Joined: Sun Apr 13, 2014 3:02 am

Re: Thermal time-lapse video of M2 bed heating up

Post by Slipshine » Sat Mar 12, 2016 10:36 pm

On a related note:

It has come up a few times recently about how long it takes for a 24v Stock Makergear bed to come up to temp.

I timed the print I just started and it was 15.5 minutes to get to 100C. If someone wants to compare that to the alum beds then its out there.

:D

Post Reply