3D printed robot gripper
Posted: Sun Apr 13, 2014 11:14 pm
Hi Everyone,
The new forum is looking good!
I mentioned the M2 in a blog posting at the makerspace I'm involved with. Check it out if you're interested in robot grippers:
http://www.kwartzlab.ca/2014/04/robot-g ... rovements/
Karl
The new forum is looking good!
I mentioned the M2 in a blog posting at the makerspace I'm involved with. Check it out if you're interested in robot grippers:
http://www.kwartzlab.ca/2014/04/robot-g ... rovements/
Karl