acceleration and jerk minimal settings and starting scripts

General discussion topics

acceleration and jerk minimal settings and starting scripts

Postby psd » Fri Dec 15, 2017 6:21 pm

Hello everyone.

I would like to reduce my acceleration and jerk to a minimum to get the best quality possible, what are your recommended minimum settings?

Can some one also provide me with the gcode lines for the starting script for acceleration and jerk?

thanks so much!
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 181
Joined: Tue Mar 08, 2016 9:09 pm

Re: acceleration and jerk minimal settings and starting scri

Postby zemlin » Thu Dec 21, 2017 6:05 pm

I have found that things are pretty clean with X and Y at 900.
I have settled into using a JERK setting .1x the XY acceleration.

M201 X900 Y900 E5000 ; acceleration
M205 X9 E5000 ; jerk

I usually run at
M201 X1600 Y1600 E5000 ; acceleration
M205 X16 E5000 ; jerk

for faster print times.
User avatar
zemlin
 
Posts: 422
Joined: Thu Feb 04, 2016 9:32 pm
Location: Indianapolis, Indiana

Re: acceleration and jerk minimal settings and starting scri

Postby psd » Thu Dec 21, 2017 7:07 pm

thank you!
just what I was looking for!
and what kind of time difference do you note between the 2? is it double the time or just a fraction?
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 181
Joined: Tue Mar 08, 2016 9:09 pm

Re: acceleration and jerk minimal settings and starting scri

Postby zemlin » Thu Dec 21, 2017 7:57 pm

I have recently used the website http://gcode.ws to get better estimates of build times. It takes jerk and acceleration into account where slicer estimates I've seen don't take those settings into consideration.
User avatar
zemlin
 
Posts: 422
Joined: Thu Feb 04, 2016 9:32 pm
Location: Indianapolis, Indiana


Return to General Discussion

Who is online

Users browsing this forum: Bing [Bot] and 2 guests