Bondtech BMG on M2

General discussion topics
Post Reply
mkmachining
Posts: 10
Joined: Fri Mar 09, 2018 10:16 pm

Bondtech BMG on M2

Post by mkmachining » Tue May 15, 2018 4:05 pm

Hi guys, anyone done this extruder swap? I just got a BMG in, it will require an adapter plate to bolt to the stock M2 motor.

Stripping filament has been my bigness problem with the M2, it's better with e3D hotends but still the vast majority of print failures.

Tyler

Post Reply