I've got some HDPE if you want to test that claimrsilvers wrote:I would use glue stick on glass. It has worked for everything so far, including PC.
If you want I can try printing it. I can go up to 295C. I suggest going at 3200 mm/min (50% of that on first layer) and having the first layer be 120% thick and having the nozzle be low to lay a wide bead.
Use 0.2mm for layer.
I would be very surprised if I could not make whatever this is stick.
New High-Temp Filament - Build Adhesion Issues!!
Re: New High-Temp Filament - Build Adhesion Issues!!
Custom 3D printing for you or your business -- quote [at] pingring.org
Re: New High-Temp Filament - Build Adhesion Issues!!
I have had no problems with PC so far.