Nema17 Damper Install

Post your advice, tips, suggestions, etc...
Post Reply
bsiu
Posts: 3
Joined: Mon Feb 22, 2016 8:11 am

Nema17 Damper Install

Post by bsiu » Tue Mar 01, 2016 2:15 am

I just got my dampers and have a few questions. I need to adjust the belt pulleys 4mm or so but don't see a way to loosen it off the stepper shaft. I see threaded holes on the pulley base but nothing inside of them. So how do i go about loosening/adjusting them?

bsiu
Posts: 3
Joined: Mon Feb 22, 2016 8:11 am

Re: Nema17 Damper Install

Post by bsiu » Tue Mar 01, 2016 6:52 am

Nevermind, there were two threads and one of them had the hex socket. Hard to tell with poor lighting, it was all the way in there.

Post Reply