Share your models and objects...
-
Dietz
- Posts: 11
- Joined: Sat Feb 20, 2016 9:59 pm
-
Contact:
Post
by Dietz » Sun Mar 06, 2016 2:14 am
Hi Will, I'm not on FaceBook if that's what you mean
Here is the finished helmet. The attachments for the oxy hose were also printed in pla. I then finished them up and made a mold (my first one) after which I cast them using an aluminum filler (more learning experiences). Not as metal looking as I wanted but better than painted. Naturally I did some interior work as well by printing some fan guides and attachments to keep the visor clear. The were painted Krylon chrome and brushed over afterwards with steel wool.
-
Attachments
-
-
-
-
Last edited by
Dietz on Tue Jul 17, 2018 3:13 pm, edited 2 times in total.
-
Jules
- Posts: 3150
- Joined: Wed Jan 21, 2015 1:36 am
Post
by Jules » Sun Mar 06, 2016 2:37 am
-
Slipshine
- Posts: 182
- Joined: Sun Apr 13, 2014 3:02 am
Post
by Slipshine » Sun Mar 06, 2016 11:52 pm
That is impressive. Really nice job.
-
jsc
- Posts: 1865
- Joined: Thu Apr 10, 2014 4:00 am
Post
by jsc » Mon Mar 07, 2016 4:08 am
That is some high level prop making. Have you showed it off at RPF or anywhere like that?
-
Dietz
- Posts: 11
- Joined: Sat Feb 20, 2016 9:59 pm
-
Contact:
Post
by Dietz » Fri Mar 11, 2016 12:58 am
Thanks everyone!
I have indeed posted the work on RPF however there doesn't seem to be any interest in it,
-
MichaelBag
- Posts: 1
- Joined: Sun Jun 10, 2018 3:29 pm
Post
by MichaelBag » Sat Jun 16, 2018 12:27 am
I use Vellejo paints for brush painting all the time. I never tried them through my airbrush. Nice results on you part What do you thin them with?
Tom
