Another M2 electronics box
Posted: Wed Jul 02, 2014 4:28 pm
A friend of mine has designed an electronics enclosure for the M2, which I thought might be of interest to some of you: http://www.thingiverse.com/thing:382115
He didn't like the standard M2 placement, where the fan is sucking heated air down into the box, so it is intended to either stay separate outside the printer, or can mount vertically to the outside of the frame.
The printed SD card holder you see in the print photos is a separate model: http://www.thingiverse.com/thing:295163
He didn't like the standard M2 placement, where the fan is sucking heated air down into the box, so it is intended to either stay separate outside the printer, or can mount vertically to the outside of the frame.
The printed SD card holder you see in the print photos is a separate model: http://www.thingiverse.com/thing:295163