Build-A-Bomb

Share your models and objects...
User avatar
jimc
Posts: 2888
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj
Contact:

Build-A-Bomb

Post by jimc » Thu Oct 23, 2014 3:45 am

so here is a project i have been working on. i always wanted a real one of these but its impossible to find. you just can get them. this is a replica of an AN-M30 100lb bomb, ww2 era. i did a little research on it and found some schematics. unfortunately they were not extremely detailed. i modeled all this to be easily 3d printable with next to no support required. the body dia is 6.25" and overall length is about 28" which makes this 3/4 scale. the real thing is 8.2" dia. to save time, money and plastic the middle straight section of the body is a pieces of 6" pvc thin wall sewer/drain pipe i picked up from the local plumbing supply. the rivets and the detonator shaft are real. those are just decorative but much easier to buy and can be had for a few bucks from mcmaster. as this is you print the nose, tail, fin ring, 4 fins, 4 fin blades, tip and the fan blades. solvent weld it all together with acetone and you got yourself a bomb. :D i have all the parts printed now. i still need to prime, paint and faux finish it. ill probably do a couple of these and paint them differently. ill hang one from the ceiling from my shop or here in my office. i should be able to get this painted in the next week. this is also my first attempt at rendering one of my models. i did that all in keyshot.
bomb render.5.jpg
bomb render.5.jpg (69.02 KiB) Viewed 27467 times

User avatar
Tim
Posts: 1205
Joined: Thu Apr 10, 2014 2:19 pm
Location: Poolesville, Maryland
Contact:

Re: Build-A-Bomb

Post by Tim » Thu Oct 23, 2014 12:58 pm

Nice rendering job. But I know you, and I know that the finished model will look so real you'll have bomb disposal experts knocking on your door. Which is why it might be a good idea not to print it full scale.

User avatar
ednisley
Posts: 1188
Joined: Fri Apr 11, 2014 5:34 pm
Location: Halfway up the Hudson
Contact:

Re: Build-A-Bomb

Post by ednisley » Thu Oct 23, 2014 1:49 pm

Tim wrote:the finished model will look so real
Nowadays, even these make folks nervous:
Image

But what else can you do with empty CO2 cartridges?

The fins test thin-wall printing, if you need a justification: http://softsolder.com/2011/10/21/zombie ... parations/

They're always the last tchotchke to go when I give a 3D printing presentation... [evil grin]

jimc: Knowing your finishing skills, it'll look exactly like the rendering and better than the real thing!

User avatar
jimc
Posts: 2888
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj
Contact:

Re: Build-A-Bomb

Post by jimc » Thu Oct 23, 2014 2:13 pm

Thanks tim and thats awesome ed, i love it! Lol as for the legal side of things, there is really nothing. You used to be able to buy this stuff many years ago in your local army navy. Was a dime a dozen but no more. It has all disappeared. Now you can buy replicas for 500-$1000. I figure if i am going to have a replica ill make it myself plus i want to be able to make a few atleast so i can use them for paint samples when i goto shows. I sent the pic to just a few people i know and in 1 day i already have about 5 sold.

User avatar
sthone
Posts: 897
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut
Contact:

Re: Build-A-Bomb

Post by sthone » Thu Oct 23, 2014 8:49 pm

What an awesome idea, I too always wanted one of these... something else to add to the ever growing list of things to print... Thanks :D

Can't wait to see how yours turns out.

-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com

User avatar
jimc
Posts: 2888
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj
Contact:

Re: Build-A-Bomb

Post by jimc » Thu Oct 23, 2014 11:54 pm

yeah ill keep this updated and post pictures as i move along with these. as of now i have one complete set of parts printed. i had atleast 1/2 dozen rolls of abs with 1/4 or less left on the spool. this is getting painted so i figured i would burn up all my junk.
Attachments
IMG_3567.jpg
IMG_3567.jpg (76.52 KiB) Viewed 27423 times

User avatar
jdacal
Posts: 466
Joined: Thu Jul 03, 2014 10:28 pm
Location: Florida
Contact:

Re: Build-A-Bomb

Post by jdacal » Sat Oct 25, 2014 2:14 am

Cool project! Going to look great.
jdacal

live print feed: http://enctrading.com/printcam/
See me Crash and Burn in Real time!

User avatar
jimc
Posts: 2888
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj
Contact:

Re: Build-A-Bomb

Post by jimc » Tue Nov 04, 2014 11:49 pm

can you believe this is 3d printed lol. this is the detonator fan blade for the bomb. its been primed and painted with a special chrome paint process i have here.
IMG_3608.JPG
IMG_3608.JPG (92.22 KiB) Viewed 27324 times
IMG_3607.JPG
IMG_3607.JPG (81.83 KiB) Viewed 27324 times

jsc
Posts: 1864
Joined: Thu Apr 10, 2014 4:00 am

Re: Build-A-Bomb

Post by jsc » Wed Nov 05, 2014 12:23 am

That's a real screw, though, right? Because that's the best looking printed screw I've ever seen otherwise.

User avatar
jimc
Posts: 2888
Joined: Wed Apr 09, 2014 11:30 pm
Location: mullica, nj
Contact:

Re: Build-A-Bomb

Post by jimc » Wed Nov 05, 2014 12:26 am

haha yes. i threaded that into the fan so i can hang it in my spray booth.

Post Reply