M2 Tool/Tape Holder

Share your models and objects...
Post Reply
User avatar
sthone
Posts: 897
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut
Contact:

M2 Tool/Tape Holder

Post by sthone » Thu Oct 30, 2014 3:18 pm

Came up with this the other day. I run a Sealed Filament Tub on the left side of my printer so I couldn't really use the other tool holder listed on Thingiverse so I came up with this one. It holds the tools included with the M2 (5) Allen Wrenches, Screw Drive Allen, and Tweezers. It will also hold the Z-Stop, and a roll of 3" Blue Painters Tape. It mounts with (2) M4x14 Screws and Nuts. http://www.thingiverse.com/thing:520011
M2ToolHolder001.jpg
M2ToolHolder001.jpg (255.62 KiB) Viewed 5580 times
M2ToolHolder002.jpg
M2ToolHolder002.jpg (333.39 KiB) Viewed 5580 times
-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com

Post Reply