Yet another overhang test part

Share your models and objects...
Post Reply
User avatar
zemlin
Posts: 467
Joined: Thu Feb 04, 2016 9:32 pm
Location: Indianapolis, Indiana

Yet another overhang test part

Post by zemlin » Sun Apr 10, 2016 3:41 pm

I know there's already a bunch of different overhang tests, but I hadn't seen one that suited me, so I made yet another.
This part goes from 40 degrees to 80 on a single surface in a simple, compact part.
(updated - I made the numbers larger so they'll show in thicker layer builds and flipped them over so they are viewed from the outside of the part)
(updated again - I printed the first version in PETG with a .5mm nozzle, and the 70 deg overhang did not fail. Changing the part to cover 40-80 - it needs to be a little bigger to accommodate that range plus I increased the depth of the overhang just to make it a tougher test)
Overhang1.JPG
Overhang2.JPG
https://grabcad.com/library/a-test-part ... -printer-1
Attachments
overhangtest80.stl
(837.97 KiB) Downloaded 743 times
Last edited by zemlin on Mon Apr 11, 2016 2:45 am, edited 3 times in total.

User avatar
Jules
Posts: 3144
Joined: Wed Jan 21, 2015 1:36 am

Re: Yet another overhang test part

Post by Jules » Sun Apr 10, 2016 4:05 pm

I like that - it's smaller than most of them. :D

mgordeeva250
Posts: 5
Joined: Wed Sep 14, 2016 5:13 pm

Re: Yet another overhang test part

Post by mgordeeva250 » Thu Sep 22, 2016 5:50 pm

Moreover, it looks fantastic!

Post Reply