new improved filament holder with cleaning sponge

Share your models and objects...

new improved filament holder with cleaning sponge

Postby psd » Tue May 03, 2016 3:00 pm

3ae2c76bc3b7cfdabf4234db02aa4d12_preview_featured.jpg

b159383dc55e62755aadff89fb3235c0_preview_featured.JPG

50753b8b776173d330332322941e8f51_preview_featured.JPG

3ae2c76bc3b7cfdabf4234db02aa4d12_preview_featured.jpg



http://www.thingiverse.com/thing:1522567

I have improved on the M2 filament holder to have an incorporated door for adding a cleaning sponge.
It also has and entry and exit lead in press fit shaft fro the 4.8Ø Bowden tube.
I made an entry lead in because I am also working on creating a sealed box for the filament with an exit tube the same as M2 Bowden tube so it plugs right into the entry under side.

Please let me know if you like it and if it was useful.
Attachments
Fil_HoldM2.STL
(788.07 KiB) Downloaded 79 times
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 182
Joined: Tue Mar 08, 2016 9:09 pm

Re: new improved filament holder with cleaning sponge

Postby Jules » Tue May 03, 2016 3:49 pm

That's pretty sweet.....can you run up a quickie for the right side as well? (On the duals, the secondary filament holder is attached with a single screw in the upper right X-motor hole.)

Or maybe just post your original format file to play with, STLs are a pure pain to try to modify.

You need to join the MakerGear M2 group over on Thingiverse and post that there as well. Great job! :D
User avatar
Jules
 
Posts: 3150
Joined: Wed Jan 21, 2015 1:36 am

Re: new improved filament holder with cleaning sponge

Postby psd » Tue May 03, 2016 3:57 pm

thanks Jules,
I appreciate it, I am a newbie to MakerGear and I would love to set it up with dual extruder, have to learn how.
I am used to printing on larger machines using dual extruders and PLA as support to wash away. Would love to do it on the M2, does it work well?

That said, I don't know exactly where the secondary filament holder goes, so I might just share my file if you like, its solidworks 2015, do you prefer it native or a STEP?

thanks
Peter


PS.. I am on thingverse and posted but didn't know there was a Makergear group, how do I find it to join?
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 182
Joined: Tue Mar 08, 2016 9:09 pm

Re: new improved filament holder with cleaning sponge

Postby Jules » Tue May 03, 2016 4:26 pm

psd wrote:thanks Jules,
I appreciate it, I am a newbie to MakerGear and I would love to set it up with dual extruder, have to learn how.
I am used to printing on larger machines using dual extruders and PLA as support to wash away. Would love to do it on the M2, does it work well?


Yes indeed - it's an easy upgrade. :D

That said, I don't know exactly where the secondary filament holder goes, so I might just share my file if you like, its solidworks 2015, do you prefer it native or a STEP?


Native Solidworks is fine. Thanks!

PS.. I am on thingverse and posted but didn't know there was a Makergear group, how do I find it to join?


Hopefully, this link works:
http://www.thingiverse.com/groups/makergear-m2
User avatar
Jules
 
Posts: 3150
Joined: Wed Jan 21, 2015 1:36 am

Re: new improved filament holder with cleaning sponge

Postby psd » Tue May 03, 2016 7:39 pm

Jules wrote:
psd wrote:thanks Jules,
I appreciate it, I am a newbie to MakerGear and I would love to set it up with dual extruder, have to learn how.
I am used to printing on larger machines using dual extruders and PLA as support to wash away. Would love to do it on the M2, does it work well?


Yes indeed - it's an easy upgrade. :D

can't wait to try it!, just order the other extruder from Makergear?

That said, I don't know exactly where the secondary filament holder goes, so I might just share my file if you like, its solidworks 2015, do you prefer it native or a STEP?


Native Solidworks is fine. Thanks!

attaching here!

SW filament holder.zip
(839.52 KiB) Downloaded 70 times

PS.. I am on thingverse and posted but didn't know there was a Makergear group, how do I find it to join?


Hopefully, this link works:
http://www.thingiverse.com/groups/makergear-m2


did it thanks!
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 182
Joined: Tue Mar 08, 2016 9:09 pm

Re: new improved filament holder with cleaning sponge

Postby Jules » Tue May 03, 2016 7:53 pm

just order the other extruder from Makergear?


There are a couple of other pieces, cables and harness, etc. that come with the Dual, so you need to order the Upgrade kit on the page below. (Be sure to tell them you are upgrading a Rev. E machine in the comments.)

http://www.makergear.com/products/m2-upgrades
User avatar
Jules
 
Posts: 3150
Joined: Wed Jan 21, 2015 1:36 am

Re: new improved filament holder with cleaning sponge

Postby psd » Tue May 03, 2016 11:53 pm

filhold.STL
(726.35 KiB) Downloaded 73 times


updated file,
clasp was a bit thin, made it thicker and deeper.
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 182
Joined: Tue Mar 08, 2016 9:09 pm

Re: new improved filament holder with cleaning sponge

Postby psd » Tue May 03, 2016 11:55 pm

Jules wrote:That's pretty sweet.....can you run up a quickie for the right side as well? (On the duals, the secondary filament holder is attached with a single screw in the upper right X-motor hole.)


Jules- can you show me pictures of current right side filament holders in place and off, maybe I can adapt this left side one to the right, if I only understood where it goes.....
- peter,

innovative product designer and tinkerer

www.petersolomondesign.com
psd
 
Posts: 182
Joined: Tue Mar 08, 2016 9:09 pm

Re: new improved filament holder with cleaning sponge

Postby Jules » Tue May 03, 2016 11:57 pm

Yeah...hang on a sec.....
User avatar
Jules
 
Posts: 3150
Joined: Wed Jan 21, 2015 1:36 am

Re: new improved filament holder with cleaning sponge

Postby Jules » Wed May 04, 2016 12:16 am

Found a couple of pics from the assembly instructions:

Filament Guide1.jpg


Filament Guide 2.jpg



Pretty simple - they go like this:

Remove the M3x12 screw from the back right corner of the X Motor.
Secure the Right Filament Guide into this position using the supplied M3x14 screw and washer.

If you get time, that'd be great - I'm totally tied up with invalid care of various creatures at the moment.
User avatar
Jules
 
Posts: 3150
Joined: Wed Jan 21, 2015 1:36 am

Next

Return to Model / Object Sharing

Who is online

Users browsing this forum: No registered users and 1 guest